|
New generation of brake callipers to improve competitiveness and energy savings in very high performance cars |
2014 |
|
Investigations on coating of dies for advanced squeeze casting process |
2014 |
|
From hot forging to thixoforging: FEM analysis of thixoforging process for steering piston production |
2014 |
|
Growth of AlN by Reactive Gas Injection of Nitrogen in an AlMg Matrix |
2014 |
|
Overview of heat treatment and surface engineering. Influences of surface finishing on hot - work tool steel |
2016 |
|
Nitridation of Al-Mg/AlN Composites Through Dynamic Heating |
2016 |
|
Influence of the preparation method on Pt3Cu/C electrocatalysts for the oxygen reduction reaction |
2016 |
|
Semi-empirical evaluation of PEMFC electro-catalytic activity |
2008 |
|
Platinum catalyst supported on mesoporous carbon for PEMFC |
2008 |
|
Mesoporous carbons as low temperature fuel cell Platinum catalyst supports |
2008 |
|
Ordered mesoporous carbons as catalyst support for PEM Fuel Cells |
2009 |
|
Nanostructured bimetallic alloys prepared via mechanochemicalsynthesis as PEMFC electrocatalysts for automotive applications |
2009 |
|
Effect of Freezing Conditions on PEM-FC Components |
2009 |
|
Computer-aided morphological analysis for maxillo-facial diagnostic: a preliminary study |
2010 |
|
Soft tissue diagnosis in maxillofacial surgery: A preliminary study on three-dimensional face geometrical features-based analysis |
2010 |
|
A morphological methodology for three-dimensional human face soft-tissue landmarks extraction: A preliminary study |
2011 |
|
Electrodischarge drilling performance on parts produced by DMLS |
2012 |
|
Studies on electrodischarge drilling of an Al2O3-TiC composite |
2013 |
|
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting |
2014 |
|
Combined reverse engineering and CAD approach for mould modelling in casting simulation |
2014 |
|
Enhanced Topology of E-Plane Resonators for High-Power Satellite Applications |
2015 |
|
Additive Manufacturing of a Microbial Fuel Cell - A detailed study |
2015 |
|
Fast and low-cost synthesis of 1D ZnO-TiO2 core-shell nanoarrays: Characterization and enhanced photo-electrochemical performance for water splitting |
2014 |
|
Nanosized Gold and Silver Spherical, Spiky, and Multi-branched Particles |
2014 |
|
On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS |
2014 |
|
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering |
2014 |
|
Shape-Controlled Synthesis of Silver Nature-Like Spiky Particles for Piezoresistive Sensor Applications |
2014 |
|
Thick mesoporous TiO2 films through a sol-gel method involving a non-ionic surfactant: Characterization and enhanced performance for water photo-electrolysis |
2014 |
|
A sensor for direct measurement of small convective heat fluxes: Validation and application to micro-structured surfaces |
2014 |
|
Charge transport improvement employing TiO2 nanotube array as front-side illuminated Dye-sensitized Solar Cell photoanode |
2013 |
|
TiO2 Nanotube Array as Efficient Transparent Photoanode in Dye-Sensitized Solar Cell with High Electron Lifetime |
2013 |
|
Vertically aligned TiO2 nanotube array for high rate Li-based micro-battery anodes with improved durability |
2013 |
|
An easy approach for the fabrication of TiO2 nanotube-based transparent photoanodes for Dye-sensitized Solar Cells |
2013 |
|
Embedding an exoskeleton hand in the astronaut's EVA glove: feasibility and ideas |
2012 |
|
GIUNTO ARTICOLARE PER ESOSCHELETRO, IN PARTICOLARE PER APPLICAZIONI AEROSPAZIALI |
2012 |
|
High efficiency dye-sensitized solar cells exploiting sponge-like ZnO nanostructures |
2012 |
|
Synthesis and Characterization of Gold Nanostars as Filler of Tunneling Conductive Polymer Composites |
2012 |
|
Chemical composition of some Roman glass tesserae discovered in a calidarium located in Northern Italy |
2003 |
|
Procedimento per la preparazione di materiali ceramici nanostrutturati |
2004 |
|
Procedimento per la preparazione di materiali ceramici compositi nanostrutturati |
2004 |
|
A method of preparing nanostructured composite ceramics materials |
2005 |
|
Influence of the co-precipitation temperature on phase evolution in yttrium-aluminium oxide materials |
2005 |
|
Different sintering routes for preparing alumina-yttrium aluminum garnet nanocomposites |
2005 |
|
A method of preparing nanostructured composite ceramic materials |
2006 |
|
Conventional sintering route for the production of alumina-based nanocomposites: a microstructural characterization |
2006 |
|
Comparison among different sintering routes for preparing alumina-YAG nanocomposites |
2006 |
|
Thermal and mechanical-induced phase transformation during YAG and Alumina-YAG syntheses |
2007 |
|
Ageing of wet-synthesized oxide powders. Role of surface carbonation, effect on sintering, restoration |
2007 |
|
YAG wet chemical synthesis from chlorides and nitrates precursors: effect on phase evolution and powder sinterability |
2009 |
|
UV-Cured polysiloxane epoxy coatings containing titanium dioxide as photosensitive semiconductor |
2009 |