|
Role of the dispersion route on the phase transformation of a nano-crystalline transition alumina |
2009 |
|
PREPARATION AND CHARACTERIZATION OF ALUMINA-DOPED POWDERS FOR THE DESIGN OF MULTI-PHASIC NANO-MICROCOMPOSITES |
2009 |
|
Alumina-based nanocomposites obtained by doping with inorganic salt solutions: Application to immiscible and reactive systems |
2009 |
|
Alumina-YAG composites: preparation, experimental characterization and numerical modelling |
2009 |
|
Mechanical Characterization of Hydroxiapatite Micro/Macro-Porous Ceramics Obtained by Means of Innovative Gel-Casting Process |
2010 |
|
Effect of various alumina nano-fillers on the thermal and mechanical behaviour of low-density polyethylene-Al2O3 composites |
2010 |
|
Design, production and biocompatibility of nanostructured porous HAp and Si-HAp ceramics as three-dimensional scaffolds for stem cell culture and differentiation |
2010 |
|
Phase and microstructural evolution of yttrium-doped nanocrystalline alumina: a contribution of advanced microscopy techniques |
2011 |
|
Transparent YAG obtained by spark plasma sintering of co-precipitated powder. Influence of dispersion route and sintering parameters on optical and microstructural characteristics |
2012 |
|
Differentiation of osteoblast and osteoclast precursors on pure and silicon-substituted synthesized hydroxyapatites |
2012 |
|
Creep behaviour of alumina/YAG composites prepared by different sintering routes |
2012 |
|
Surface and mechanical properties of transparent polycrystalline YAG fabricated by SPS |
2013 |
|
Optimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules |
2013 |
|
Microstructure and mechanical properties of alumina-5vol.%zirconia nanocomposites prepared by powder coating and powder mixing routes |
2013 |
|
An IR and XPS spectroscopy assesment of the physico-chemical surface properties of alumina-YAG nanopowders |
2013 |
|
Elaboration of alumina-zirconia composites: Role of the zirconia content on the microstructure and mechanical properties |
2013 |
|
Analysis of the plasters of some relevant chapels of the Sacro Monte (Sacred Mountain) of Varallo Sesia, Piedmont, Italy |
2013 |
|
Surface Coating of Oxide Powders: A New Synthesis Method to Process Biomedical Grade Nano-Composites |
2014 |
|
Procedimento di produzione di compositi ceramici multifasici a base di zirconia |
2014 |
|
Co-Precipitation of YAG Powders for Transparent Materials: Effect of the Synthesis Parameters on Processing and Microstructure |
2014 |
|
Zirconia-based composites for biomedical applications: Role of second phases on composition, microstructure and zirconia transformability |
2015 |
|
Towards long lasting zirconia-based composites for dental implants. Part I: Innovative synthesis, microstructural characterization and in vitro stability |
2015 |
|
Structural ceramic nanocomposites: A review of properties and powders' synthesis methods |
2015 |
|
Processing of alumina-zirconia composites by surface modification route with enhanced hardness and wear resistance |
2015 |
|
Process for producing zirconia-based multi-phasic ceramic composites |
2015 |
|
Al2O3/ZrO2/Y3Al5O12 composites: A high-temperature mechanical characterization |
2015 |
|
Thermal stability and sintering behaviour of hydroxyapatite nanopowders |
2007 |
|
Effect of initial particle packing on the sintering of nanostructured transition alumina |
2008 |
|
A Modified Gelcasting Procedure to Prepare Alumina Porous Components: Process Optimization and Preliminary Mechanicals Tests |
2009 |
|
Sintering of a nano-crystalline metastable alumina: influence of the firing parameters on the phase development and microstructural evolution |
2009 |
|
Si-substituted hydroxyapatite nanopowders by precipitation: Synthesis, thermal stability and sintering behavior |
2009 |
|
Pure and Substituted Hydroxyapatite Nanopowders by Precipitation |
2009 |
|
Porous Alumina and Zirconia Bodies Obtained by a Novel Gel Casting Process |
2009 |
|
Mg-substituted hydroxyapatite nanopowders: Synthesis, thermal stability and sintering behaviour |
2009 |
|
Materiali ceramici a porosità controllata: sviluppo ed impieghi industriali |
2009 |
|
Gelcasting of dense and porous ceramics by using a natural gelatine |
2009 |
|
Gel Casting of Porous Alumina and Zirconia Bodies |
2009 |
|
Effect of Heating Rate on Phase and Microstructural Evolution During Pressureless Sintering of a Nanostructured Transition Alumina |
2009 |
|
Study of the effect of prolonged magnetic stirring on the physico-chemical surface properties of nanometric transition alumina |
2010 |
|
Follow-up of zirconia crystallization on a surface modified alumina powder |
2010 |
|
F-substituted hydroxyapatite nanopowders: Thermal stability, sintering behaviour and mechanical properties |
2010 |
|
Role of immiscible and miscible second phases on the sintering kinetics and microstructural development of nano-crystalline a-Al2O3-based materials |
2011 |
|
Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies development |
2011 |
|
Nanopowder engineering: from synthesis to sintering. The case of alumina-based materials |
2011 |
|
Microstructural design and elaboration of multiphase ultra-fine ceramics |
2011 |
|
Electrospun polyamide-6 membranes containing titanium dioxide as photocatalyst |
2011 |
|
Effect of the ceramic filler features on the properties of photopolymerized BaTiO3-acrylic composites |
2011 |
|
Sol–gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour |
2012 |
|
Nanostructured Materials for Sensing |
2012 |
|
Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior |
2012 |