|
Study of innovative coatings for hot working tools |
1998 |
|
La deposizione di film spessi con processi thermal spray |
2003 |
|
Micromechanical characterization of electrophoretic-deposited green films |
1999 |
|
Development of zirconia thick films for solid oxide fuel cells: comparison between electrophoretic and screen-printed depositions |
2002 |
|
Development of a gas sensor by thick film technology for automotive applications: Choice of materials - Realization of a prototype |
2002 |
|
Composition de revetement et procédé de revetement d'une surface d'un substrat |
2002 |
|
Characterization of LSGM films obtained by electrophoretic deposition (EPD) |
2006 |
|
Present and future of thick film hybrid circuits: Materials and applications |
2000 |
|
A visible and long-wavelength photocured epoxy coating for stone protection |
2014 |
|
An Acrylic Latex Filled with Zinc Oxide by Miniemulsion Polymerization as a Protective Coating for Stones |
2014 |
|
Rivestimenti vetroceramici antiusura per leghe di alluminio |
2003 |
|
Oxidation protective coating for SiC fibre reinforced glass matrix composites |
2004 |
|
Oxidation Protective Glass-Ceramic Coating for SiC Fibre Reinforced Glass Matrix Composites |
2004 |
|
Investigations on coating of dies for advanced squeeze casting process |
2014 |
|
Thick mesoporous TiO2 films through a sol-gel method involving a non-ionic surfactant: Characterization and enhanced performance for water photo-electrolysis |
2014 |
|
UV-Cured polysiloxane epoxy coatings containing titanium dioxide as photosensitive semiconductor |
2009 |
|
Surface Coating of Oxide Powders: A New Synthesis Method to Process Biomedical Grade Nano-Composites |
2014 |
|
Effect of the fabrication method on the functional properties of BaTiO3: PVDF nanocomposites |
2013 |
|
THE HYBRID PRESS-FITTED ADHESIVE BONDED JOINT: THEORETICAL ASPECTS AND A PRACTICAL APPLICATION ON THE AUTOMOTIVE WHEEL |
2014 |
|
Properties and working behaviour of nitrided hot working tool steels |
1999 |
|
Corrosion resistance and Properties of Pump Pistons Coated with Hard Materials |
2001 |
|
Study of the effect of coated diamond bits in the fabrication of diamond tool segments based on Fe-alloys |
2003 |
|
Advances in diamond tools for working lithoid materials |
2003 |
|
THE INFLUENCE OF PLASMA NITRIDING AND POST OXIDISING TREATMENTON THE RESISTANCE OF AISI H11 TO CYCLING IMMERSIONIN MOLTEN ALUMINIUM ALLOY |
2004 |
|
Study on new ceramic coated metal powders: Microstructure and properties |
2005 |
|
Fracture of nitrided and nitrocarburized blunt notch three-point bending die steel specimens |
2005 |
|
Hard coatings to prevent the washout phenomena in high pressure die casting tools |
2006 |
|
Study of the resistance to washout of PVD coated hot working tool steels |
2007 |
|
Performance enhancements of die casting tools trough PVD nanocoatings |
2008 |
|
PROCEDIMENTO PER IL RIVESTIMENTO DI PARTICOLARI IN LEGA DI ALLUMINIO, IN PARTICOLARE IN LEGA DI ALLUMINIO PRESSOCOLATA, E PARTICOLARI REALIZZATI TRAMITE TALE PROCEDIMENTO |
2009 |
|
Development of multilayer coatings for forming dies and tools of aluminium alloy from liquid state |
2009 |
|
Wear Behavior of Fiber Laser Textured TiN Coatings in a Heavy Loaded Sliding Regime |
2012 |
|
Process for coating parts made of aluminium alloy and parts obtained therefrom |
2012 |
|
Prediction of the Critical Load of a Metal-rolling System by Considering the Damage of the Coated Surface |
2012 |
|
Caratterizzazione ad usura di rivestimenti PVD con e senza laser texturing |
2012 |
|
Scratch resistance of fibre laser surface textured TiN coatings |
2013 |
|
Influence of heat treatment and surface engineering on thermal fatigue behaviour of tool steel |
2013 |
|
Failure modes of PVD coatings in molten Al-alloy contact |
2013 |
|
E-glass fibres with a surface coating: reaction to alkaline attack |
1985 |
|
Distribution of chromiun and nickel between the phases present in the borided layer of alloy steels |
1985 |
|
Preferential distribution of chromium and nickel in the borided layer obtained on synthetic Fe-Cr-Ni alloys |
1986 |
|
The effect of carbon, chromium and nickel on the hardness of borided layers |
1987 |
|
Comportamento all'attacco alcalino a 20°C delle fibre di vetro E con rivestimento superficiale |
1987 |
|
Boronizing of Sintered Ferrous Materials |
1987 |
|
Boriding of Steels. Some Notes on the Boron Diffusion Mechanism |
1987 |
|
The texture of borided layers grown on Fe-Ni and Fe-Cr alloys |
1988 |
|
Surface Hardening of Titanium Alloys: Chemical Characterisation of the Nitrided Layers |
1988 |
|
Texture of surface layers obtained by ion nitriding of titanium alloys |
1988 |
|
Characterization of surface layers in ion-nitrided titanium and titanium alloys |
1988 |
|
Caratteristiche chimiche, morfologiche e durometriche dello strato borurato ottenuto su leghe ferrose |
1988 |