|
Elaboration and mechanical characterization of multi-phase alumina-based ultra-fine composites |
2012 |
|
Comprehensive Characterization of Large Piezoresistive Variation of Ni-PDMS Composites |
2012 |
|
Thermal analyses applied to ceramic nanopowders: from synthesis to sintering. A review on transition alumina powder-based materials |
2013 |
|
Epoxy/BaTiO3 Light-Cured Composites as Organic Capacitors |
2013 |
|
Effect of the fabrication method on the functional properties of BaTiO3: PVDF nanocomposites |
2013 |
|
Development and mechanical characterization of novel ceramic foams fabricated by gel-casting |
2013 |
|
The Contribution of Natural Hydroxyapatite to the Development of Bone Substitutes |
2013 |
|
A Comparative Study between Melt-Derived and Sol-Gel Synthesized 45S5 Bioactive Glasses |
2013 |
|
Actuators based on intrinsic conductive polymers/carbon nanoparticles nanocomposites |
2013 |
|
Issues in nanocomposite ceramic engineering: focus on processing and properties of alumina-based composites |
2014 |
|
THE HYBRID PRESS-FITTED ADHESIVE BONDED JOINT: THEORETICAL ASPECTS AND A PRACTICAL APPLICATION ON THE AUTOMOTIVE WHEEL |
2014 |
|
Development of Hybrid Piezoelectric Materials for Tactile Sensing |
2014 |
|
RKKP bioactive glass-ceramic material through an aqueous sol-gel process |
2015 |
|
Properties and working behaviour of nitrided hot working tool steels |
1999 |
|
Corrosion resistance and Properties of Pump Pistons Coated with Hard Materials |
2001 |
|
Study of the effect of coated diamond bits in the fabrication of diamond tool segments based on Fe-alloys |
2003 |
|
Advances in diamond tools for working lithoid materials |
2003 |
|
HVOF hard coatings for the enhancement of erosion resistance of components to be applied in water treatement implants |
2004 |
|
Optimal microstructural design of a catalytic premixed FeCrAlloy fiber burner for methane combustion |
2004 |
|
THE INFLUENCE OF PLASMA NITRIDING AND POST OXIDISING TREATMENTON THE RESISTANCE OF AISI H11 TO CYCLING IMMERSIONIN MOLTEN ALUMINIUM ALLOY |
2004 |
|
Controls and quality demands in the jewellery investment casting process |
2004 |
|
Study on new ceramic coated metal powders: Microstructure and properties |
2005 |
|
Fracture of nitrided and nitrocarburized blunt notch three-point bending die steel specimens |
2005 |
|
The challenge of PM tool steels for the innovation |
2006 |
|
Hard coatings to prevent the washout phenomena in high pressure die casting tools |
2006 |
|
Study of the resistance to washout of PVD coated hot working tool steels |
2007 |
|
Toughness and microstructure stability in hot-working tool steels subjected to washout in molten aluminium |
2008 |
|
Performance enhancements of die casting tools trough PVD nanocoatings |
2008 |
|
Austempering effect on structure properties and performances of hot-work tool steel |
2008 |
|
Thermo-mechanical and oxidation behaviour of high temperature advanced metallic alloys |
2009 |
|
PROCEDIMENTO PER IL RIVESTIMENTO DI PARTICOLARI IN LEGA DI ALLUMINIO, IN PARTICOLARE IN LEGA DI ALLUMINIO PRESSOCOLATA, E PARTICOLARI REALIZZATI TRAMITE TALE PROCEDIMENTO |
2009 |
|
Development of multilayer coatings for forming dies and tools of aluminium alloy from liquid state |
2009 |
|
The laser surface remelting of austenitic stainless steel |
2010 |
|
Wear Behavior of Fiber Laser Textured TiN Coatings in a Heavy Loaded Sliding Regime |
2012 |
|
Process for coating parts made of aluminium alloy and parts obtained therefrom |
2012 |
|
Prediction of the Critical Load of a Metal-rolling System by Considering the Damage of the Coated Surface |
2012 |
|
Caratterizzazione ad usura di rivestimenti PVD con e senza laser texturing |
2012 |
|
Scratch resistance of fibre laser surface textured TiN coatings |
2013 |
|
Influence of heat treatment and surface engineering on thermal fatigue behaviour of tool steel |
2013 |
|
Failure modes of PVD coatings in molten Al-alloy contact |
2013 |
|
Initial Oxidation Behavior in Air of TiAl-2Nb and TiAl-8Nb Alloys Produced by Electron Beam Melting |
2015 |
|
Effect of Chromium and Boron on the Morphological and Hardness Characteristics of Cementite |
1985 |
|
E-glass fibres with a surface coating: reaction to alkaline attack |
1985 |
|
Distribution of chromiun and nickel between the phases present in the borided layer of alloy steels |
1985 |
|
Preferential distribution of chromium and nickel in the borided layer obtained on synthetic Fe-Cr-Ni alloys |
1986 |
|
Compacted Graphite Cast Irons - Characteristics of Pig and Cast Iron Castings Inoculated by Calcium Containing Alloys |
1986 |
|
Distribution equilibria of iron and nickel in two phase fields of the Fe-Ni-B system |
1986 |
|
Balance of distribution of some transition metals between theM'M″B and (M' M″)in2B phases |
1986 |
|
The effect of carbon, chromium and nickel on the hardness of borided layers |
1987 |
|
Comportamento all'attacco alcalino a 20°C delle fibre di vetro E con rivestimento superficiale |
1987 |