|
An analysis of carbon nanotube structure wettability before and after oxidation treatment |
2008 |
|
Potential of SiC multilayer ceramics for high temperature applications in oxidising environment |
2008 |
|
NiAl(Si)/Al2O3 co-continuous composites by double reactive metal penetration into silica preforms |
2008 |
|
Multilayer SiC for thermal protection system of space vehicles: Manufacturing and testing under simulated re-entry conditions |
2008 |
|
MoSi2 laminate processed by tape casting: Microstructure and mechanical properties' investigation |
2008 |
|
Improving macroscopic physical and mechanical properties of thick layers of aligned multiwall carbon nanotubes by annealing treatment |
2008 |
|
HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties |
2008 |
|
Sonochemical preparation of high surface area MgAl2O4 spinel |
2009 |
|
SiC-based multilayered composites containing short carbon fibres obtained by tape casting |
2009 |
|
Preparation and properties of NiAl(Si)/Al2O3 co-continuous composites obtained by reactive metal penetration |
2009 |
|
Mesoporous alumina obtained by combustion synthesis without template |
2009 |
|
Laser beam welding of dissimilar aluminium alloys of 2000 and 7000 series: effect of post-welding thermal treatments on the T-joint strength |
2009 |
|
Investigation on surface properties of TiO2 films modified by DC glow discharge plasma |
2009 |
|
Thermal and electronic properties of macroscopic MWCNTs blocks |
2010 |
|
Oxidation Resistance of Multilayer SiC for Space Vehicle Thermal Protection Systems |
2010 |
|
Multilayer SiC for thermal protection system of space vehicles with decreased thermal conductivity through the thickness |
2010 |
|
Microstructure and mechanical properties of co-continuous metal/ceramic composites obtained from Reactive Metal Penetration of commercial aluminium alloys into cordierite |
2010 |
|
Effect of dc glow discharge plasma treatment on PET/TiO2 thin film surfaces for enhancement of bioactivity |
2010 |
|
Compression Behaviour of Thick Vertically Aligned Carbon Nanotube Blocks |
2010 |
|
A Simple Approach to the Study of the Ageing Behaviour of Laser Beam and Friction Stir Welds between Similar and Dissimilar Alloys |
2011 |
|
Mechanical and corrosion performance of SiC multilayer containing porous layers |
2011 |
|
Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation |
2011 |
|
Thermophysical properties of SiC multilayer prepared by tape casting and pressureless sintering |
2012 |
|
Self passivating behavior of multilayer SiC under simulated atmospheric re-entry conditions |
2012 |
|
Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting |
2012 |
|
High temperature degradation of plasma sprayed thermal barrier coatings in oxidizing environment |
2012 |
|
Electron Beam Melting of high niobium containing TiAl alloy: feasibility investigation |
2012 |
|
Cost effective glassy carbon brake pads solution for automotive systems |
2012 |
|
Corrosion Behavior of SiC Laminate Under Decomposed Sulfuric Acid at 850°C |
2012 |
|
Production and characterization of Ni and Cu composite coatings by electrodeposition reinforced with carbon nanotubes or graphite nanoplatelets |
2013 |
|
Pressureless sintering of ZrB2–SiC composite laminates using boron and carbon as sintering aids |
2013 |
|
Phase transitions assessment on γ-TiAl by Thermo Mechanical Analysis |
2013 |
|
Microstructure and mechanical properties of milled fibre/SiC multilayer composites prepared by tape casting and pressureless sintering |
2013 |
|
Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications |
2013 |
|
Reactivity and Microstructure of Al2O3-Reinforced Magnesium-Matrix Composites |
2014 |
|
The ExoMet Project: EU/ESA Research on High-Performance Light-Metal Alloys and Nanocomposites |
2014 |
|
Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs) |
2014 |
|
Thermophysical Properties of Short Carbon Fiber/SiC Multilayer Composites Prepared by Tape Casting and Pressureless Sintering |
2015 |
|
Oxidation behavior of ZrB2/SiC laminates: Effect of composition on microstructure and mechanical strength |
2015 |