|
Surface reactivity, cytotoxic and morphological transforming effects of diatomaceaous earth products in Syrian hamster embryo cells |
2006 |
|
Metal matrixes for cobalt-free diamond tools: an innovative approach |
2006 |
|
Effects of T5 and T6 Heat Treatments Applied to Rheocast A356 Parts for Automotive Applications |
2008 |
|
Studies of plasma nitriding of stainless-steels |
2009 |
|
Microstructure and mechanical behaviour of Al-based alloy obtained by liquid forging technique |
2009 |
|
Grain growth on galvanic deposition of aluminium |
2011 |
|
Effect of the filler metals on aluminium alloy joints |
2011 |
|
Dimensional stability analysis in Al-Si alloys |
2011 |
|
CONTINUOS CASTING AND ROLLING FOR THE MANUFACTURING OF THIN AL SHEETS |
2012 |
|
Aluminium based components with enhanced characteristics through advanced squeeze casting process |
2012 |
|
Structural transformations in Zn-Al22 alloy solidified by ultra-rapid cooling |
2013 |
|
New frontiers for thixoforming |
10.1504/IJMMP.2013.052650 |
|
Microstructural evolution and mechanical properties of AlMg/AlN composite materials obtained "in-situ" |
2013 |
|
Investigation on cobalt based alloy modified by titanium for dental applications |
2013 |
|
Investigation on AlZn10Si8Mg alloys for automotive application |
2013 |
|
Design and casting technology for Ti-Al-Nb-Ta alloy |
2103 |
|
About heat treatment and properties of Duplex Stainless steels |
2013 |
|
Preparation and Structural Characterization of Rapidly Solidified Al-Cu Alloys |
2014 |
|
New generation of brake callipers to improve competitiveness and energy savings in very high performance cars |
2014 |
|
Investigations on coating of dies for advanced squeeze casting process |
2014 |
|
From hot forging to thixoforging: FEM analysis of thixoforging process for steering piston production |
2014 |
|
Growth of AlN by Reactive Gas Injection of Nitrogen in an AlMg Matrix |
2014 |
|
Overview of heat treatment and surface engineering. Influences of surface finishing on hot - work tool steel |
2016 |
|
Nitridation of Al-Mg/AlN Composites Through Dynamic Heating |
2016 |
|
Influence of the preparation method on Pt3Cu/C electrocatalysts for the oxygen reduction reaction |
2016 |
|
Semi-empirical evaluation of PEMFC electro-catalytic activity |
2008 |
|
Platinum catalyst supported on mesoporous carbon for PEMFC |
2008 |
|
Mesoporous carbons as low temperature fuel cell Platinum catalyst supports |
2008 |
|
Ordered mesoporous carbons as catalyst support for PEM Fuel Cells |
2009 |
|
Nanostructured bimetallic alloys prepared via mechanochemicalsynthesis as PEMFC electrocatalysts for automotive applications |
2009 |
|
Effect of Freezing Conditions on PEM-FC Components |
2009 |
|
Computer-aided morphological analysis for maxillo-facial diagnostic: a preliminary study |
2010 |
|
Soft tissue diagnosis in maxillofacial surgery: A preliminary study on three-dimensional face geometrical features-based analysis |
2010 |
|
A morphological methodology for three-dimensional human face soft-tissue landmarks extraction: A preliminary study |
2011 |
|
Nanosized Gold and Silver Spherical, Spiky, and Multi-branched Particles |
2014 |
|
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering |
2014 |
|
Shape-Controlled Synthesis of Silver Nature-Like Spiky Particles for Piezoresistive Sensor Applications |
2014 |
|
Thick mesoporous TiO2 films through a sol-gel method involving a non-ionic surfactant: Characterization and enhanced performance for water photo-electrolysis |
2014 |
|
A sensor for direct measurement of small convective heat fluxes: Validation and application to micro-structured surfaces |
2014 |
|
Charge transport improvement employing TiO2 nanotube array as front-side illuminated Dye-sensitized Solar Cell photoanode |
2013 |
|
TiO2 Nanotube Array as Efficient Transparent Photoanode in Dye-Sensitized Solar Cell with High Electron Lifetime |
2013 |
|
Vertically aligned TiO2 nanotube array for high rate Li-based micro-battery anodes with improved durability |
2013 |
|
An easy approach for the fabrication of TiO2 nanotube-based transparent photoanodes for Dye-sensitized Solar Cells |
2013 |
|
Embedding an exoskeleton hand in the astronaut's EVA glove: feasibility and ideas |
2012 |
|
GIUNTO ARTICOLARE PER ESOSCHELETRO, IN PARTICOLARE PER APPLICAZIONI AEROSPAZIALI |
2012 |
|
High efficiency dye-sensitized solar cells exploiting sponge-like ZnO nanostructures |
2012 |
|
Synthesis and Characterization of Gold Nanostars as Filler of Tunneling Conductive Polymer Composites |
2012 |
|
Mechanical Characterization of Hydroxiapatite Micro/Macro-Porous Ceramics Obtained by Means of Innovative Gel-Casting Process |
2010 |
|
Design, production and biocompatibility of nanostructured porous HAp and Si-HAp ceramics as three-dimensional scaffolds for stem cell culture and differentiation |
2010 |
|
Differentiation of osteoblast and osteoclast precursors on pure and silicon-substituted synthesized hydroxyapatites |
2012 |