Analysis of the plasters of some relevant chapels of the Sacro Monte (Sacred Mountain) of Varallo Sesia, Piedmont, Italy |
2013 |
Surface Coating of Oxide Powders: A New Synthesis Method to Process Biomedical Grade Nano-Composites |
2014 |
Zirconia-based composites for biomedical applications: Role of second phases on composition, microstructure and zirconia transformability |
2015 |
Towards long lasting zirconia-based composites for dental implants. Part I: Innovative synthesis, microstructural characterization and in vitro stability |
2015 |
Thermal stability and sintering behaviour of hydroxyapatite nanopowders |
2007 |
Si-substituted hydroxyapatite nanopowders by precipitation: Synthesis, thermal stability and sintering behavior |
2009 |
Pure and Substituted Hydroxyapatite Nanopowders by Precipitation |
2009 |
Mg-substituted hydroxyapatite nanopowders: Synthesis, thermal stability and sintering behaviour |
2009 |
F-substituted hydroxyapatite nanopowders: Thermal stability, sintering behaviour and mechanical properties |
2010 |
Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies development |
2011 |
Sol–gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour |
2012 |
Nanostructured Materials for Sensing |
2012 |
Comprehensive Characterization of Large Piezoresistive Variation of Ni-PDMS Composites |
2012 |
Epoxy/BaTiO3 Light-Cured Composites as Organic Capacitors |
2013 |
The Contribution of Natural Hydroxyapatite to the Development of Bone Substitutes |
2013 |
Actuators based on intrinsic conductive polymers/carbon nanoparticles nanocomposites |
2013 |
THE HYBRID PRESS-FITTED ADHESIVE BONDED JOINT: THEORETICAL ASPECTS AND A PRACTICAL APPLICATION ON THE AUTOMOTIVE WHEEL |
2014 |
Development of Hybrid Piezoelectric Materials for Tactile Sensing |
2014 |
HVOF hard coatings for the enhancement of erosion resistance of components to be applied in water treatement implants |
2004 |
Optimal microstructural design of a catalytic premixed FeCrAlloy fiber burner for methane combustion |
2004 |
THE INFLUENCE OF PLASMA NITRIDING AND POST OXIDISING TREATMENTON THE RESISTANCE OF AISI H11 TO CYCLING IMMERSIONIN MOLTEN ALUMINIUM ALLOY |
2004 |
Controls and quality demands in the jewellery investment casting process |
2004 |
Toughness and microstructure stability in hot-working tool steels subjected to washout in molten aluminium |
2008 |
Effect of Chromium and Boron on the Morphological and Hardness Characteristics of Cementite |
1985 |
Distribution of chromiun and nickel between the phases present in the borided layer of alloy steels |
1985 |
Preferential distribution of chromium and nickel in the borided layer obtained on synthetic Fe-Cr-Ni alloys |
1986 |
Compacted Graphite Cast Irons - Characteristics of Pig and Cast Iron Castings Inoculated by Calcium Containing Alloys |
1986 |
Distribution equilibria of iron and nickel in two phase fields of the Fe-Ni-B system |
1986 |
Balance of distribution of some transition metals between theM'M″B and (M' M″)in2B phases |
1986 |
Characterization of surface layers in ion-nitrided titanium and titanium alloys |
1988 |
β transus influence on α-β titanium alloys behaviour in ion-nitriding process |
1990 |
SiC whiskers-aluminium 6061 composite: microstructure and mechanical characteristic anisotrophy |
1990 |
On borocarbides present in borided layers of steels |
1990 |
Nuove fibre di vetro resistenti agli alcali per rinforzo di cemento portland |
1990 |
DSC study of ageing sequence in 6061 aluminium alloy - SiC whiskers composite |
1990 |
Structural study of borided layers obtained on synthetic Fe-Ni alloys |
1991 |
Natural aging characteristics of aluminium alloy 6061 reinforced with SiC whiskers and particles |
1991 |
Kinetics of precipitation hardening in SiC whiskers reinforced 6061 aluminium alloy |
1991 |
Compositi con matrice in lega di magnesio |
1991 |
Laser boronizing of some titanium alloys |
1992 |
Heat treatment design of metal-matrix composites: role of strain at the interfaces |
1992 |
Interfaces in metal matrix composites |
1993 |
Control of emissions from diesel engine vehicles |
1994 |
Preparazione per colata in gravità di compositi alluminio/acciaio: ruolo dell'interfaccia |
1994 |
Interfacial reaction in AZ61/AZ91/P100 Mg/graphite composite: an Auger spectroscopy investigation |
1994 |
Thermal stability of Cu-K-V catalyst for diesel soot combustion |
1996 |
Cu-K-V catalysts for diesel soot combustion |
1996 |
The effect of mechanical recycling on the microstructure and properties of PA66 composites reinforced with carbon fibers |
2015 |