|
Thermal fatigue behaviour of a 2014/Al2O3-SiO2 (Saffil Fibre) composite processed by squeeze casting |
2000 |
|
High temperature behaviour of a Ti-6Al-4V/TiCp composite processed by BE-CIP-HIP method |
2000 |
|
Degradation at 1200°C of a SiC coated 2D-Nicalon/C/SiC composite processed by SICFILL® method |
2000 |
|
Suitability of aluminizing for protection of nichel superalloys turbine blades in oxidative and corrosive environments |
2001 |
|
Forging of 2124/SiCp composite: preliminary studies of the effects on microstructure and strength |
2001 |
|
High temperature oxidation of multilayered SiC processed by tape casting and sintering |
2002 |
|
High temperature oxidation of SiC/C/SiCf composites |
2002 |
|
High temperature oxidation of SiC/C/SiCf and SiC/BN/SiCf composites |
2002 |
|
Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch |
2006 |
|
High catalytic activity of SCS-synthesized ceria towards diesel soot combustion |
2006 |
|
New ceramic heat exchangers with enhanced heat transfer properties for recuperative gas burners |
2011 |
|
Exploring composites based on PPO blend as ablative thermal protection systems – Part II: The role of equiaxial fillers |
2012 |
|
Exploring composites based on PPO blend as ablative thermal protection systems – Part I: The role of layered fillers |
2012 |
|
Influence of ceramic particle features on the thermal behavior of PPO-matrix composites |
2014 |
|
Combustion synthesis of lanthanum chromite starting from water solutions: Investigation of process mechanism by DTA–TGA–MS |
2004 |
|
Procedimento per formare uno strato protettivo su un substrato metallico di turbina |
2005 |
|
Catalyzed traps for diesel soot abatement: In situ processing and deposition of perovskite catalyst |
2005 |
|
Method for forming a protective layer on a metallic turbine substrate |
2006 |
|
Ageing of reticulate Si-SiC foams in porous burners Ageing of reticulate Si-SiC foams in porous burners |
2010 |
|
Al2O3-ZrO2 nanocomposites produced by solution combustion synthesis followed by ultrasonic milling |
2011 |
|
Si-SiC-ZrB2 ceramics by silicon reactive infiltration |
2012 |
|
Fabrication of short carbon fibre reinforced SiC multilayer composites by tape casting |
2012 |
|
Oxidation Behavior at 1600 °C of Si-SiC-ZrB2 Composites Produced by Si Reactive Infiltration |
2014 |
|
Processing of co-continuous ceramic composites by reactive penetration method: influence of composition of ceramic preforms and infiltrating alloys |
2002 |
|
Premixed metal fibre burners based on a Pd catalyst |
2003 |
|
Combustion synthesis of perovskite-type catalysts for natural gas combustion |
2003 |
|
Preparation of C4 ceramic/metal composites by reactive metal penetration of commercial ceramics |
2006 |
|
High cycle fatigue study of metal–ceramic co-continuous composites |
2006 |
|
Alumina–zirconia–yttria nanocomposites prepared by solution combustion synthesis |
2006 |
|
Effect of porosity of cordierite preforms on microstructure and mechanical strength of co-continuous ceramic composites |
2007 |
|
An analysis of carbon nanotube structure wettability before and after oxidation treatment |
2008 |
|
Potential of SiC multilayer ceramics for high temperature applications in oxidising environment |
2008 |
|
NiAl(Si)/Al2O3 co-continuous composites by double reactive metal penetration into silica preforms |
2008 |
|
Multilayer SiC for thermal protection system of space vehicles: Manufacturing and testing under simulated re-entry conditions |
2008 |
|
MoSi2 laminate processed by tape casting: Microstructure and mechanical properties' investigation |
2008 |
|
Improving macroscopic physical and mechanical properties of thick layers of aligned multiwall carbon nanotubes by annealing treatment |
2008 |
|
HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties |
2008 |
|
SiC-based multilayered composites containing short carbon fibres obtained by tape casting |
2009 |
|
Preparation and properties of NiAl(Si)/Al2O3 co-continuous composites obtained by reactive metal penetration |
2009 |
|
Mesoporous alumina obtained by combustion synthesis without template |
2009 |
|
Thermal and electronic properties of macroscopic MWCNTs blocks |
2010 |
|
Oxidation Resistance of Multilayer SiC for Space Vehicle Thermal Protection Systems |
2010 |
|
Multilayer SiC for thermal protection system of space vehicles with decreased thermal conductivity through the thickness |
2010 |
|
Microstructure and mechanical properties of co-continuous metal/ceramic composites obtained from Reactive Metal Penetration of commercial aluminium alloys into cordierite |
2010 |
|
Compression Behaviour of Thick Vertically Aligned Carbon Nanotube Blocks |
2010 |
|
A Simple Approach to the Study of the Ageing Behaviour of Laser Beam and Friction Stir Welds between Similar and Dissimilar Alloys |
2011 |
|
Mechanical and corrosion performance of SiC multilayer containing porous layers |
2011 |
|
Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation |
2011 |
|
Thermophysical properties of SiC multilayer prepared by tape casting and pressureless sintering |
2012 |
|
Self passivating behavior of multilayer SiC under simulated atmospheric re-entry conditions |
2012 |